FreeBSD virtual environment management and repository

2020-10 upd: we reached the first fundraising goal and rented a server in Hetzner for development! Thank you for donating !

Attention! Current pages describe CBSD version 13.0.x. If you are using an older version, please update first.

Attention! I apologize for the automatic translation of this text. You can improve it by sending me a more correct version of the text or fix html pages via GITHUB repository.

Jail limits control

jrctl, jrctl-tui commands

			% cbsd jrctl
			% cbsd jrctl-tui
		
Description:

CBSD supports many of FreeBSD's mechanisms for enforcing limits on a jail's resource usage.

File quotas

Floating file quotas are only possible for jails residing on ZFS-file system. For systems stored on UFS a similar restrictions can be enforced using an md(4)-based vnode file/image and making use of mdsize for the jail).

Renice prioritization

CBSD uses renice(8) to prioritize each jail's access to the CPU. This makes it possible to select different priorities on a per jail basis and give the most impoartant jails the highest share of CPU time. For example, you may want to have your distcc jail set to a low priority, give your web server medium and the jail hosting the databse the highest priority. The actual priorization is taken care of by nice which gets the value for each jail from jail rctl. The values set here correspond to the behavior of nice(1) — the lowest integer resulting in the highest priority.

Renice example:

1) Let's create an AMP jail and have it run a php script that performs some work (such as bench.zip taken from http://www.php-benchmark-script.com/). We then clone the jail, calling the first highprio1 and the second lowprio1. Using cbsd jrctl-tui we give the first the highest possible priority -20, and set the second jail to the lowest priority of 20. In addition we limit the jail to one core through cpuset with cbsd jconfig (single-core systems are hard to come by these days and smart schedulers do not allow for a clean experiment without taking this step ;-).

			% cbsd jls display=jid,jname,ip4_addr,cpuset
			16   highprio1   10.0.0.121/24  4
			17   lowprio1    10.0.0.122/24  4
		

— jid 16 is the higher prioritised jail while jid 17 — is set to a lower priority. Both run on the fourth core.

make poll top state congestion php-fpm with JID output:

		% export iter=1
		% while [ 1 ]; do
			printf "Iter: $iter" ;
			iter=$((iter+1))
			top -jab | grep php
			sleep 1
		done
		

We launch the script on both IPs at the same time:

	% fetch -T 300 -o /dev/stdout http://10.0.0.121 & fetch -T 300 -o /dev/stdout http://10.0.0.122 & 
	[1] 65985
	[2] 65986
	
	--------------------------------------
	|        PHP BENCHMARK SCRIPT        |
	--------------------------------------
	Start : 2014-01-06 16:28:59
	Server : @10.0.0.121
	PHP version : 5.4.23
	Platform : FreeBSD
	--------------------------------------
	test_math                 : 12.870 sec.
	test_stringmanipulation   : 15.896 sec.
	test_loops                : 8.968 sec.
	test_ifelse               : 7.864 sec.
	--------------------------------------
	Total time:               : 45.598 sec.
	
	--------------------------------------
	|        PHP BENCHMARK SCRIPT        |
	--------------------------------------
	Start : 2014-01-06 16:29:02
	Server : @10.0.0.122
	PHP version : 5.4.23
	Platform : FreeBSD
	--------------------------------------
	test_math                 : 32.632 sec.
	test_stringmanipulation   : 18.053 sec.
	test_loops                : 6.323 sec.
	test_ifelse               : 5.504 sec.
	--------------------------------------
	Total time:               : 62.512 sec.
	
	[2]    Done                          fetch -T 300 -o /dev/stdout http://10.0.0.122
	[1]  + Done                          fetch -T 300 -o /dev/stdout http://10.0.0.121
		

and we can soon observe the following output from top:

	Iter: 1
	65101  16 www           1  35  -20 32548K 11456K CPU4    4   0:35  20.56% php-fpm: pool www (php-fpm)
	65587  17 www           1  52   20 32548K 11456K RUN     4   0:32   0.00% php-fpm: pool www (php-fpm)
	Iter: 2
	65101  16 www           1  60  -20 32548K 11456K RUN     4   0:36  25.98% php-fpm: pool www (php-fpm)
	65587  17 www           1  42   20 32548K 11456K CPU4    4   0:33   2.10% php-fpm: pool www (php-fpm)
	Iter: 3
	65101  16 www           1  60  -20 32548K 11456K CPU4    4   0:36  26.27% php-fpm: pool www (php-fpm)
	65587  17 www           1  94   20 32548K 11456K RUN     4   0:33   8.59% php-fpm: pool www (php-fpm)
	Iter: 4
	65101  16 www           1  61  -20 32548K 11456K CPU4    4   0:37  31.69% php-fpm: pool www (php-fpm)
	65587  17 www           1  95   20 32548K 11456K RUN     4   0:34   9.47% php-fpm: pool www (php-fpm)
	Iter: 5
	65101  16 www           1  62  -20 32548K 11456K CPU4    4   0:37  35.60% php-fpm: pool www (php-fpm)
	65587  17 www           1  95   20 32548K 11456K RUN     4   0:34  11.18% php-fpm: pool www (php-fpm)
	Iter: 6
	65101  16 www           1  64  -20 32548K 11456K CPU4    4   0:38  38.96% php-fpm: pool www (php-fpm)
	65587  17 www           1  96   20 32548K 11456K RUN     4   0:34  12.79% php-fpm: pool www (php-fpm)
	..
		

The jail with jid 16 is getting a larger share of the available CPU cycles and executes almost 1.5 times faster.

RACCT/RCTL framework

If your kernel has support RACCT/RCTL, you can set limits on the jail and watch the current statistics for jail resources. To do this, there is a command cbsd jrctl, which arguments

			% cbsd jrctl mode=apply  ...
		

and

			% cbsd jrctl mode=unset  ...
		

automatically called for the install or removal of limits when working jstart or jstop respectively. By command:

			% cbsd jrctl mode=show
		

you can see current statistics on the jail resources consumed, which can be used to generate reports and graphs for loading jail, as well as the CBSD daemon used to generate recommendations on the need to add new resources and for overload warnings.

By command:

			% cbsd jrctl
		

without arguments you cat see default limits on all jails. Through argument display you can specify the fields for output data. If display is not specified, the value takes from $workdir/etc/defaults/jrctl.conf file, which you can change at its discretion via $workdir/etc/jrctl.conf

You can edit the limits through

			% cbsd jrctl-tui jname=jname
		

or, if you build a hosting and want to create limits on non-interactively, you can generate a file $workdir/$jname/jail.limits

By jrctl you can set the following limits jail:

a) All you can do a framework FreeBSD rctl(8):

	cputime 	   CPU time, in seconds
	datasize	   data size, in bytes
	stacksize	   stack size, in bytes
	coredumpsize	   core dump size, in bytes
	memoryuse	   resident set size, in bytes
	memorylocked	   locked memory, in bytes
	maxproc 	   number of processes
	openfiles	   file descriptor table size
	vmemoryuse	   address space limit, in bytes
	pseudoterminals    number of PTYs
	swapuse 	   swap usage, in bytes
	nthr		   number of threads
	msgqqueued	   number of queued SysV messages
	msgqsize	   SysV message queue size, in bytes
	nmsgq		   number of SysV message queues
	nsem		   number of SysV semaphores
	nsemop		   number of SysV semaphores modified in a single semop(2) call
	nshm		   number of SysV shared memory segments
	shmsize 	   SysV shared memory size, in bytes
	wallclock	   wallclock time, in seconds